Paper
10 June 2004 Design of a production process to enhance optical performance of 3ω optics
Rahul R. Prasad, Justin R. Bruere, John M. Halpin, Phil Lucero, Steven Mills, Michael Bernacil, Richard P. Hackel
Author Affiliations +
Abstract
Using the Phoenix pre-production conditioning facility we have shown that raster scanning of 3ω optics using a XeF excimer laser and mitigation of the resultant damage sites with a CO2 laser can enhance their optical damage resistance. Several large-scale (43 cm x 43 cm) optics have been processed in this facility. A production facility capable of processing several large optics a week has been designed based on our experience in the pre-production facility. The facility will be equipped with UV conditioning lasers -- 351-nm XeF excimer lasers operating at 100 Hz and 23 ns. The facility will also include a CO2 laser for damage mitigation, an optics stage for raster scanning large-scale optics, a damage mapping system (DMS) that images large-scale optics and can detect damage sites or precursors as small as ≈15 μm, and two microscopes to image damage sites with ≈5 μm resolution. The optics will be handled in a class 100 clean room, within the facility that will be maintained at class 1000.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rahul R. Prasad, Justin R. Bruere, John M. Halpin, Phil Lucero, Steven Mills, Michael Bernacil, and Richard P. Hackel "Design of a production process to enhance optical performance of 3ω optics", Proc. SPIE 5273, Laser-Induced Damage in Optical Materials: 2003, (10 June 2004); https://doi.org/10.1117/12.523857
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gas lasers

Excimer lasers

Carbon monoxide

Cameras

Raster graphics

Resonators

Imaging systems

RELATED CONTENT


Back to Top