Subaperture approaches to finishing and testing astronomical optics

Gregory W. Forbes; Marc Tricard

doi:10.1117/12.566312

7 July 2004 Subaperture approaches to finishing and testing astronomical optics

Gregory W. Forbes, Marc Tricard

Proceedings Volume 5382, Second Backaskog Workshop on Extremely Large Telescopes; (2004) https://doi.org/10.1117/12.566312
Event: Second Backaskog Workshop on Extremely Large Telescopes, 2003, Backaskog, Sweden

Abstract

We describe the application of both stitching interferometry and magneto-rheological finishing (MRF) to the surface metrology and final figure correction of large optics. These particular subaperture technologies help to address the need for flexible systems that improve both overall manufacturing time and cost effectiveness. MRF can achieve high volumetric removal rates with a small-footprint tool that is perfectly conformable and highly stable. This tool is therefore well suited to finishing large optics (including aspheres) and correcting mid-spatial frequency errors. The system does not need vacuum, reduces microroughness to below one nm rms on most materials, and is able to meet the figure tolerance specs for astronomical optics. Such a technology is ideally complemented by a system for the stitching of interferometric subaperture data. Stitching inherently enables the testing of larger apertures with higher resolution and, thanks to the inbuilt calibration, even to higher accuracy in many situations. Moreover, given the low-order character of the dominant residual uncertainties in the stitched full-aperture data, such an approach is well suited to adaptive mirrors because the actuators correct precisely these deformations. While this approach enables the non-null testing of parts with greater aspheric departure and can lead to a significantly reduced non-common air path in the testing of long-radius concave parts, it is especially effective for convex optics. That is, stitching is particularly well suited to the testing of secondary mirrors and, alongside the testing of the off-axis primary segments, these are clearly critical challenges for extremely large telescope (ELT) projects.

Citation Download Citation

Gregory W. Forbes and Marc Tricard "Subaperture approaches to finishing and testing astronomical optics", Proc. SPIE 5382, Second Backaskog Workshop on Extremely Large Telescopes, (7 July 2004); https://doi.org/10.1117/12.566312

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available