Paper
20 July 2004 Distributed Brillouin temperature measurements without frequency scanning for dymanic process monitoring
Author Affiliations +
Abstract
Distrbuted Brillouin intensity vs. temperature measurements along an optical fiber are studied theoretically and experimentally using counter-propagating laser beams interacting at a fixed beat frequency. By monitoring the Brillouin temperature spectrum without scanning the beat frequency, one can acquire distributed temperature measurements within seconds rather than minutes, making this acquisition method suitable for dynamic processes such as hot spots and fire detection. This technique requires knowledge of a threshold temperature condition, which is mathematically derived by considering the temperature dependence on Brillouin peak power and linewidth in the frequency domain. Temperature varying fiber regions are monitored using 0.2 and 2 m spatial resolutions along 2 and 11 km fiber lengths respectively.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Graham A. Ferrier, Xiaoyi Bao, Lufan Zou, and Liang Chen "Distributed Brillouin temperature measurements without frequency scanning for dymanic process monitoring", Proc. SPIE 5393, Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Composites III, (20 July 2004); https://doi.org/10.1117/12.548107
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Spatial resolution

Flame detectors

Optical fibers

Fiber optics sensors

Data acquisition

Fiber optics

Back to Top