Interest of thermal and mechanical modeling for cooled astronomical instruments: the example of WIRCam

Philippe Feautrier; Eric Stadler; Pascal Puget

doi:10.1117/12.550434

16 September 2004 Interest of thermal and mechanical modeling for cooled astronomical instruments: the example of WIRCam

Philippe Feautrier, Eric Stadler, Pascal Puget

Author Affiliations +

Proceedings Volume 5497, Modeling and Systems Engineering for Astronomy; (2004) https://doi.org/10.1117/12.550434
Event: SPIE Astronomical Telescopes + Instrumentation, 2004, Glasgow, United Kingdom

Abstract

In the past decade, new tools have been offered to the system designers in terms of thermal and mechanical modeling. In addition to an overwhelming increase of computer capabilities, these tools are now mature enough to drive the design of complex astronomical instruments, in particular if these instruments have to be cooled. This is the case of WIRCam, the new wide-field infrared camera to be installed on the CFHT in Hawaii on the Mauna Kea summit. This camera uses four 2Kx2K Rockwell Hawaii-2RG infrared detectors and includes 2 optical barrels and 2 filter wheels. This camera is mounted at the prime focus of the 3.6m CFHT telescope. The mass to be cooled is close to 100 kg. The camera will use a Gifford Mac-Mahon closed-cycle cryo-cooler in order to avoid strenuous daily re-fillings on the telescope due to the camera location. This paper will present the thermal-mechanical model of the camera using Finite-Element Analysis under the I-deas software. The capabilities of the I-deas thermal module (TMG) will be demonstrated for our particular application: including conduction, radiation and free-convection management, variations of the cooling power and thermal characteristics of the materials as a function of the temperature, and studies in permanent regime and transient analysis. The hypotheses used for the thermal model are explained and results of the model are shown to explain the choice of the cryo-cooler. Predicted performances (cooling down time, warm-up time, and mechanical deformations) are presented and compared to measurements. All these models were carried out using a normal PC laptop running I-deas/TMG.

Citation Download Citation

Philippe Feautrier, Eric Stadler, and Pascal Puget "Interest of thermal and mechanical modeling for cooled astronomical instruments: the example of WIRCam", Proc. SPIE 5497, Modeling and Systems Engineering for Astronomy, (16 September 2004); https://doi.org/10.1117/12.550434

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available