Paper
17 May 2005 Strain transferring of embedded fiber Bragg grating sensors
Dong-Sheng Li, Hong-Nan Li
Author Affiliations +
Abstract
The relationship between the strains measured by a fiber Bragg grating sensor and the actual structural strains is deduced, then the average strain transfer rate computed by the formulation developed in this paper is compared with available experimental data. The critical adherence length of an optical fiber sensor is determined by a strain lag parameter, which contains both the effects of the geometry and the relative stiffness of the structural components. The analyses shows that the critical adherence length of a fiber sensing segment is the minimum length with which the fiber has to be tightly glued to a structure for adequate sensing. The strain transfer rate of an optical fiber sensor embedded in a multi-layered structure is developed in a similar way, and the factors that influence the efficiency of optical fiber sensor strain transferring are discussed. It is concluded that the strains, sensed by a fiber Bragg grating, have to be magnified by a factor (strain transfer rate) to equal exactly to the actual structural strains.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dong-Sheng Li and Hong-Nan Li "Strain transferring of embedded fiber Bragg grating sensors", Proc. SPIE 5765, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, (17 May 2005); https://doi.org/10.1117/12.596652
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Optical fibers

Roentgenium

Structured optical fibers

Coating

Fiber optics sensors

Back to Top