Measurement of light attenuation in dense fog conditions for FSO applications

M. Gebhart; E. Leitgeb; S. Sheikh Muhammad; B. Flecker; C. Chlestil; M. Al Naboulsi; F. de Fornel; H. Sizun

doi:10.1117/12.614830

18 August 2005 Measurement of Light attenuation in dense fog conditions for FSO applications

M. Gebhart, E. Leitgeb, S. Sheikh Muhammad, B. Flecker, C. Chlestil, M. Al Naboulsi, F. de Fornel, H. Sizun

Proceedings Volume 5891, Atmospheric Optical Modeling, Measurement, and Simulation; 58910K (2005) https://doi.org/10.1117/12.614830
Event: Optics and Photonics 2005, 2005, San Diego, California, United States

Abstract

Free Space Optics (FSO) has gained considerable importance in this decade of demand for high bandwidth transmission capabilities. FSO can provide the last mile solution, but the availability and reliability issues concerned with it have acquired more attention, and a need for thorough investigations. In this work, we present our results about fog attenuation at the 950 and 850 nm wavelengths in heavy maritime fog with peak values up to 500 dB/km. For the attenuation measurement, optical wavelengths are transmitted over the same path of fog in free air to a receiver, measuring the power of every wavelength. The RF marker technology employed takes advantage of modulating every optical wavelength with an individual carrier frequency, allowing to use one optical front end for the receiver and to separate individual wavelengths by electrical signal filters. The measurement of fog attenuation at different wavelengths was performed at the France Telecom R & D test facility at La Turbie. Maritime or advection fog, which caused the light attenuation consists of water droplets of larger diameter in the order of 20 μm and can cause visibilities as low as 30 meters. The visibility was measured using a transmissiometer at 550 nm. We compare our measurement data with the commonly used light attenuation models of Kruse and Kim, and present some interesting insights. The practical measurements described try to validate the models and therefore should lead to a more accurate availability prediction for FSO links.

Citation Download Citation

M. Gebhart, E. Leitgeb, S. Sheikh Muhammad, B. Flecker, C. Chlestil, M. Al Naboulsi, F. de Fornel, and H. Sizun "Measurement of Light attenuation in dense fog conditions for FSO applications", Proc. SPIE 5891, Atmospheric Optical Modeling, Measurement, and Simulation, 58910K (18 August 2005); https://doi.org/10.1117/12.614830

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available