Paper
30 September 2005 Optical sensing of ammonia gas in air using the SPR technique
Author Affiliations +
Abstract
An optical sensor of ammonia gas, based on the surface plasmon resonance (SPR) method has been investigated. The surface plasmon resonance (SPR) is very sensitive, and so is the optical technique used in chemical sensing. The angle of incident of light at which a resonant effect is observed, as well as the dip of a resonant are very sensitive to variations of the optical parameters of the medium on a surface-active plasmon metal layer. The sensing structures were made as follows. Gold layers were coated by means of vacuum evaporation on a substrate, 1 mm thick, made of a BK7 glass slide. The thickness of Au was about 48 nm. An active sensor layer of WO3 was deposited by thermal evaporation on the gold film while a Nafion"R" film was coated by means of the spin-coating method. The sensing structures were coupled on immersion oil with a prism coupler. A change of the intensity of light of the plasmon dip was observed when chemical active films (WO3 or Nafion"R") were exposed to varying concentrations of NH3. Optical ammonia gas sensors display a very fast response time and a fast regeneration time at room temperature.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erwin Maciak, Zbigniew Opilski, Tadeusz Pustelny, and Agnieszka Stolarczyk "Optical sensing of ammonia gas in air using the SPR technique", Proc. SPIE 5956, Integrated Optics: Theory and Applications, 59561K (30 September 2005); https://doi.org/10.1117/12.626003
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Plasmons

Gold

Structural sensing

Prisms

Thin films

Glasses

Back to Top