Paper
30 May 2006 Finite element analysis of the mirror room of the 2-m telescope
Fu Zhao, Ping Wang, Yuejin Zhao, Li Zhang, Hongbing Xin, Liang Lv
Author Affiliations +
Proceedings Volume 6148, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 61480V (2006) https://doi.org/10.1117/12.674108
Event: 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2005, Xian, China
Abstract
This paper describes the optimum solution improving the total quality of the mirror room of the 2-m telescope. Referring to the mirror room with the dimetric truss, a group of reasonable sizes of the mirror room are given by optimization methods and modal analyses, which will improve the resonant frequency by 9.4%. As a result, the mirror room is less likely to resonate. Besides, the static module and dynamic response module in ANSYS are utilized respectively to analyze the mirror room deformation caused by gravity, the modal analysis and the vibration response. By the calculation of ANSYS, finite element analysis(FEA) method proves that the performance of the mirror room is greatly enhanced by means of optimum design.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fu Zhao, Ping Wang, Yuejin Zhao, Li Zhang, Hongbing Xin, and Liang Lv "Finite element analysis of the mirror room of the 2-m telescope", Proc. SPIE 6148, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 61480V (30 May 2006); https://doi.org/10.1117/12.674108
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Finite element methods

Telescopes

Modal analysis

Structural design

Mirror structures

Analytical research

Back to Top