Paper
21 April 2006 Low cost packaging of a reflective electro-absorption modulator/detector with optimized spurious free dynamic range
S. Karlsson, Y. Yu, C. P. Liu, R. Schatz, C. H. Chuang, O. Kjebon, U. Westergren, T. Tsegaye, A. J. Seeds
Author Affiliations +
Abstract
A packaged high speed reflective electroabsorption transceivers for radio-over-fiber applications is demonstrated. The transceiver, an AFPMD (Asymmetric vertically addressed Fabry-Perot Modulator/Detector), is successfully packaged into a standard module, originally intended for 10 Gbit/s Ethernet detectors. The packaging process and the electrical, optical and thermal performance of the packaged component are presented. A bandwidth of 6 GHz, a total reflective optical coupling loss of 7.1 dB and a responsitivity of 0.14 mA/mW are accomplished. By optimizing the operation optical wavelength and bias voltage, fifth-order nonlinearity dominates the intermodulation distortion and a spurious free dynamic range (SFDR) of 101dB.Hz4/5 at 5.554GHz can be achieved experimentally.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Karlsson, Y. Yu, C. P. Liu, R. Schatz, C. H. Chuang, O. Kjebon, U. Westergren, T. Tsegaye, and A. J. Seeds "Low cost packaging of a reflective electro-absorption modulator/detector with optimized spurious free dynamic range", Proc. SPIE 6185, Micro-Optics, VCSELs, and Photonic Interconnects II: Fabrication, Packaging, and Integration, 61850M (21 April 2006); https://doi.org/10.1117/12.660124
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulators

Packaging

Sensors

Reflectivity

Fabry–Perot interferometers

Intermodulation

Transceivers

RELATED CONTENT


Back to Top