The optical design and preliminary optomechanical tolerances of the high resolution imaging channel for the BepiColombo mission to Mercury

Gabriella Marra; Luigi Colangeli; Elena Mazzotta Epifani; Pasquale Palumbo; Stefano Debei; Enrico Flamini; Giampiero Naletto

doi:10.1117/12.671444

6 July 2006 The optical design and preliminary optomechanical tolerances of the high resolution imaging channel for the BepiColombo mission to Mercury

Gabriella Marra, Luigi Colangeli, Elena Mazzotta Epifani, Pasquale Palumbo, Stefano Debei, Enrico Flamini, Giampiero Naletto

Author Affiliations +

Proceedings Volume 6273, Optomechanical Technologies for Astronomy; 627328 (2006) https://doi.org/10.1117/12.671444
Event: SPIE Astronomical Telescopes + Instrumentation, 2006, Orlando, Florida , United States

Abstract

This paper deals with the optical design and preliminary optomechanical tolerances of HRIC, the High Resolution Imaging Channel of the SIMBIO-SYS instrument, selected as part of the scientific payload for the ESA cornerstone BepiColombo mission to Mercury. Under the lead of Italy (Principal Investigator: E. Flamini), the project is based on an international co-operation with Institutes from France and Switzerland. Starting from the stringent scientific requirement of 5m ground pixel scale at 400 km from the planet surface, a robust optical design based on a catadioptric Ritchey-Chretien configuration modified with a dedicated corrector camera has been achieved. The optimized configuration is convenient in terms of image quality, number of optical elements, and total length. The channel guarantees a corrected FoV of about 1.5° and allows the achievement of the required resolution with a detector of 2k × 2k pixels. The telescope is diffraction limited, thanks to its focal ratio (F/8), and shows an optimised radiometric flux within the operative spectral range (400 - 900 nm). The channel is equipped with one panchromatic and 3 selective filters. The operation plan foresees the coverage of at least 20% of the whole Hermean surface with the HRIC. The preliminary optomechanical tolerances and the corresponding image quality have been analyzed. Further thermo-mechanical analysis is in progress, which is being analyzed by means of ray-tracing tools for image quality evaluation.

Citation Download Citation

Gabriella Marra, Luigi Colangeli, Elena Mazzotta Epifani, Pasquale Palumbo, Stefano Debei, Enrico Flamini, and Giampiero Naletto "The optical design and preliminary optomechanical tolerances of the high resolution imaging channel for the BepiColombo mission to Mercury", Proc. SPIE 6273, Optomechanical Technologies for Astronomy, 627328 (6 July 2006); https://doi.org/10.1117/12.671444

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available