Paper
7 February 2007 High-power, high-brightness 100W QCW diode laser at 940nm
C. Fiebig, G. Erbert, W. Pittroff, H. Wenzel, A. Maaßdorf, S. Einfeldt, G. Tränkle
Author Affiliations +
Abstract
We demonstrate 940nm diode lasers with more than 100W QCW output power having an aperture width 5 to 10 times smaller than commonly used 10mm bars. We used a super-large vertical waveguide structure to reduce the facet load. The waveguide design results in a very small vertical divergence of only 14° FWHM (24° including 95% of power). The threshold current of a device with 1mm wide aperture is about 8A and the slope efficiency is above 70%. The lateral far field width is below 10°, including 95% of power, and the wall plug efficiency is around 50% at 100W output power.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Fiebig, G. Erbert, W. Pittroff, H. Wenzel, A. Maaßdorf, S. Einfeldt, and G. Tränkle "High-power, high-brightness 100W QCW diode laser at 940nm", Proc. SPIE 6456, High-Power Diode Laser Technology and Applications V, 64560K (7 February 2007); https://doi.org/10.1117/12.699966
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Waveguides

High power lasers

Cladding

Pulsed laser operation

Reliability

Laser damage threshold

RELATED CONTENT


Back to Top