The development of a heterodyne velocimeter system for use in sub-microsecond time regimes

M. D. Bowden; M. P. Maisey

doi:10.1117/12.734194

13 September 2007 The development of a heterodyne velocimeter system for use in sub-microsecond time regimes

M. D. Bowden, M. P. Maisey

Proceedings Volume 6662, Optical Technologies for Arming, Safing, Fuzing, and Firing III; 66620B (2007) https://doi.org/10.1117/12.734194
Event: Photonic Devices + Applications, 2007, San Diego, California, United States

Abstract

Recent advances over the last five years in high-speed digitizing oscilloscopes and high-bandwidth photodiodes, driven primarily by the telecommunications industry, have enabled the development of a new type of interferometer for measuring high velocities, such as those found in detonics experiments. The heterodyne velocimeter can be visualized as a fiber-based Michelson interferometer. The beam from a single-mode fiber laser at 1550 nm is passed through a circulator, acting to separate bi-directional light. The beam is then reflected via free-space optics from the surface of interest, and then focused back into the same fiber. This reflected light is mixed with an approximately equal amount of non-reflected light, and the resulting interference is recorded using a high-bandwidth photodiode and oscilloscope. In contrast to more traditional velocimetry techniques such as VISAR, only a single data channel is required per probe. The uses of heterodyne velocimetry have, to date, been primarily in the multi-microsecond time regime, i.e. explosively driven metal plates. In this paper, we present a four-channel, ultra-high bandwidth system designed for use in the sub-microsecond time regime, and present the results obtained from laser-driven flyer plates traveling in excess of 3 km s^-1. We have developed analysis software suited to use in this time regime, where a relatively small displacement is recorded. The original heterodyne velocimeter relied on back-reflectance from the probe to obtain the non-reflected light. This limits both the flexibility of the system and the efficiency of the probes. We have overcome this issue by introducing a beam splitter into the system prior to the circulator. This allows the probing system to be designed for maximum efficiency, and we are then able to tune the non-reflected light on a shot-to-shot basis.

Citation Download Citation

M. D. Bowden and M. P. Maisey "The development of a heterodyne velocimeter system for use in sub-microsecond time regimes", Proc. SPIE 6662, Optical Technologies for Arming, Safing, Fuzing, and Firing III, 66620B (13 September 2007); https://doi.org/10.1117/12.734194

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available