Paper
14 November 2007 Optical system design of multi-spectral and large format color CCD aerial photogrammetric camera
Yixian Qian, Tianxiang Sun, Xiaodong Gao, Wei Liang
Author Affiliations +
Proceedings Volume 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 67224K (2007) https://doi.org/10.1117/12.783670
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China
Abstract
Multi-spectrum and high spatial resolution is the vital problem for optical design of aerial photogrammetric camera all the time. It is difficult to obtain an outstanding optical system with high modulation transfer function (MTF) as a result of wide band. At the same time, for acquiring high qualified image, chromatic distortion in optical system must be expected to be controlled below 0.5 pixels; it is a trouble thing because of wide field and multi-spectrum. In this paper, MTF and band of the system are analyzed. A Russar type photogrammetric objective is chosen as the basic optical structure. A novel optical system is presented to solve the problem. The new optical photogrammetric system, which consists of panchromatic optical system and chromatic optical system, is designed. The panchromatic optical system, which can obtain panchromatic image, makes up of a 9k×9k large format CCD and high-accuracy photographic objective len, its focal length is 69.83mm, field angle is 60°×60°, the size of CCD pixels is 8.75um×8.75um, spectral scope is from 0.43um to 0.74um, modulation transfer function is all above 0.4 in whole field when spatial frequency is at 60lp/mm, distortion is less than 0.007%. In a chromatic optical system, three 2k×2k array CCDs combine individually three same photographic objectives, the high resolution chromatic image is acquired by the synthesis of red, green, blue image data information delivered by three CCD sensors. For the chromatic system, their focal length is 24.83mm and they have the same spectral range of 0.39um to 0.74um. A difference is that they are coated in different film on their protect glass. The pixel number is 2048 × 2048; its MTF exceeds 0.4 in full field when spatial frequency is 30lp/mm. The advantages of digital aerial photogrammetric camera comparison with traditional film camera are described. It is considered that the two development trends on digital aerial photogrammetric camera are high-spectral resolution and high-spatial resolution. Merits of the aerial photogrammetric camera are multi-spectral, high resolution, low distortion and light-weight and wide field. It can apply in aerial photography and remote sense in place of traditional film camera. After put on trial and analyzing from the design results, the system can meet large scale aerial survey.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yixian Qian, Tianxiang Sun, Xiaodong Gao, and Wei Liang "Optical system design of multi-spectral and large format color CCD aerial photogrammetric camera", Proc. SPIE 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 67224K (14 November 2007); https://doi.org/10.1117/12.783670
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Cameras

Colorimetry

Optical design

CCD cameras

Distortion

Spatial frequencies

Back to Top