Paper
21 November 2007 Switchable multiwavelength erbium-doped fiber laser incorporating a sampled fiber Bragg grating written in polarization-maintaining fiber
Zhanyuan Liu, Yan-ge Liu, Jiangbing Du, Shuzhong Yuan, Xiaoyi Dong
Author Affiliations +
Proceedings Volume 6781, Passive Components and Fiber-based Devices IV; 67812W (2007) https://doi.org/10.1117/12.745597
Event: Asia-Pacific Optical Communications, 2007, Wuhan, China
Abstract
A stable multiwavelength erbium-doped fiber laser is proposed and demonstrated successfully. Through carefully adjusting the state of the polarization controller, the stable two three-wavelength with a spacing of 0.8 nm and one four-wavelength with a spacing of 0.4 nm fiber laser have been obtained. A nonlinear optical loop mirror (NOLM) with 70-m long Photonic Crystal Fiber (PCF) is employed to ensure stable room-temperature multiwavelength operation. The measured power fluctuation of each wavelength is less than 0.2 dB and the peak power differences among the main oscillation wavelengths are less than 1.0 dB. Another desirable characteristic is that it needs a relatively low pump power of 100 mW. The signal-to-noise ratio is ~35 dB. And it is better than that inserting single-mode fiber (SMF) ever reported.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhanyuan Liu, Yan-ge Liu, Jiangbing Du, Shuzhong Yuan, and Xiaoyi Dong "Switchable multiwavelength erbium-doped fiber laser incorporating a sampled fiber Bragg grating written in polarization-maintaining fiber", Proc. SPIE 6781, Passive Components and Fiber-based Devices IV, 67812W (21 November 2007); https://doi.org/10.1117/12.745597
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Fiber lasers

Single mode fibers

Polarization

Fiber Bragg gratings

Signal to noise ratio

Photonic crystal fibers

Back to Top