Paper
15 April 2008 Edge response revisited
Author Affiliations +
Abstract
The edge response is one of many techniques used to calculate the MTF (Modulation Transfer Function) of an imaging system. The MTF can be used to calculate the MRTD function (Minimal Resolvable Temperature Difference) for thermal imagers or the MRC (Minimal Resolvable Contrast) function for visible image systems. Most of the conventional techniques used to calculate the MRTD or MRC functions are time consuming and can be influenced by the subjectivity of the operator. A comparison of conventional MRTD measurements for more than 300 systems is compared with the MRTD function derived using the edge response technique.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shimshon N. Lashansky, Shlomo Mansbach, Michael J. Berger, Tehila Karasik, and Moran Bin-Nun "Edge response revisited", Proc. SPIE 6941, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XIX, 69410Z (15 April 2008); https://doi.org/10.1117/12.777957
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Minimum resolvable temperature difference

Signal to noise ratio

Spatial frequencies

Contrast transfer function

Thermography

Fourier transforms

Back to Top