Paper
14 May 2008 Si moulds for glass and polymer microlenses replication
Author Affiliations +
Abstract
The concept of the fabrication process of glass microlenses integrated with silicon and polymer replicas is presented. These kinds of microlenses are formed using a silicon master which is wet etched in alkaline solutions (anisotropic etching) and/or in acid solutions (isotropic etching). The control of the times and the selection of the solutions, joined with the designs of the mask for conventional photolithography and the quality of the silicon wafers are the key for obtaining the desired shapes and sizes. The fabricated moulds are used to replicate microlenses in polymer by the standard well known replication technologies and also to fabricate glass microlenses integrated on a silicon frame.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Albero, L. Nieradko, C. Gorecki, H. Ottevaere, V. Gomez, and J. Pietarinen "Si moulds for glass and polymer microlenses replication", Proc. SPIE 6992, Micro-Optics 2008, 69920A (14 May 2008); https://doi.org/10.1117/12.783093
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Silicon

Microlens

Glasses

Anisotropic etching

Semiconducting wafers

Photomasks

RELATED CONTENT

Thick SU-8 photolithography for BioMEMS
Proceedings of SPIE (January 15 2003)
Three-dimensional bonding technologies for MEMS
Proceedings of SPIE (April 24 2003)
Optical microlenses for MOEMS
Proceedings of SPIE (July 01 2005)
Micromachined multifiber optic splices
Proceedings of SPIE (May 22 1995)

Back to Top