Paper
16 May 2008 Refractometric sensor based on induced losses in the region of transition from a curved side-polished POF fiber
M. Lomer, C. A. Galindez, M. A. Quintela, A. Quintela, J. Mirapeix, J. M. Lopez-Higuera
Author Affiliations +
Proceedings Volume 7004, 19th International Conference on Optical Fibre Sensors; 70045H (2008) https://doi.org/10.1117/12.786340
Event: 19th International Conference on Optical Fibre Sensors, 2008, Perth, WA, Australia
Abstract
A refractometric sensor that uses the transition region of a U-bent Plastic Optical Fiber (POF) when it is polished laterally is presented. By polishing a lateral segment of the fiber, a part of the plastic optical fiber core is removed and an elliptical surface is formed on the bend. It is found that that the polishing with an angle equals to the critical angle of a straight optical fiber the sensitivity of this transducer structure is enhanced. Then, the incident light is totally reflected and the transition losses decrease locally. In addition, the sensitivity increases compared to the polishing in the region of bending losses. The proposed transducer is successfully checked with experimental measurements and different kinds of liquids. Potential applications are suggested.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Lomer, C. A. Galindez, M. A. Quintela, A. Quintela, J. Mirapeix, and J. M. Lopez-Higuera "Refractometric sensor based on induced losses in the region of transition from a curved side-polished POF fiber", Proc. SPIE 7004, 19th International Conference on Optical Fibre Sensors, 70045H (16 May 2008); https://doi.org/10.1117/12.786340
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polishing

Sensors

Phase only filters

Interfaces

Liquids

Cladding

Optical fibers

Back to Top