Paper
10 July 2008 Vibration measurements at the Large Binocular Telescope (LBT)
Author Affiliations +
Abstract
The Large Binocular Telescope (LBT) is an international collaboration, with partners from the United States, Italy, and Germany. The telescope uses two 8.4-meter diameter primary mirrors to produce coherent images with the combined light along with adaptive optics. The correct functioning and optimum performance of the LBT is only achieved through a complex interplay of various optical elements. Each of these elements has its individual vibration behaviour, and therefore it is necessary to characterize the LBT as a distributed vibration system. LINC-NIRVANA is a near-infrared image-plane beam combiner with advanced, multi-conjugated adaptive optics, and one of the interferometric instruments for the Large Binocular Telescope (LBT). Its spectral range goes from 1.0 μm to 2.45 μm, therefore the requirements for the maximum optical path difference (OPD) are very tight (λ/10 ~ 100 nm). 1 During two dedicated campaigns, the vibrations introduced by various actuators were measured using different kinds of sensors. The evaluation of the obtained data allows an estimation of the frequency and amplitude contributions of the individual vibration sources. Until the final state of the LBT is reached, further measurements are necessary to optimize and adapt the equipment and also the investigated elements and configurations (measurement points and directions, number of sensors, etc.).
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Brix, V. Naranjo, U. Beckmann, R. Bertram, T. Bertram, J. Brynnel, S. Egner, W. Gaessler, T. M. Herbst, M. Kuerster, R. R. Rohloff, S. Rost, and J. Schmidt "Vibration measurements at the Large Binocular Telescope (LBT)", Proc. SPIE 7012, Ground-based and Airborne Telescopes II, 70122J (10 July 2008); https://doi.org/10.1117/12.787533
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Mirrors

Actuators

Computer programming

Electroluminescence

Optical components

Control systems

RELATED CONTENT

Pointing control for the SPIDER balloon-borne telescope
Proceedings of SPIE (July 22 2014)
The performances of the GTC secondary mirror drive unit
Proceedings of SPIE (September 29 2004)
Adaptive Telescope Design Using Computer Tools
Proceedings of SPIE (October 28 1985)
Modal Control Applied To The Real Time Figure Control Of...
Proceedings of SPIE (September 01 1972)
Actuators For A Segmented Mirror Control System
Proceedings of SPIE (November 03 1983)
Special and innovative aspects of the GTC M2 drive mechanism
Proceedings of SPIE (February 04 2003)

Back to Top