Paper
23 July 2008 Measurements of large optical surfaces with a laser tracker
Author Affiliations +
Abstract
Surface measurements represent a significant part of the cost for manufacturing large aspheric optics. Both polished and rough ground surfaces must be measured with high precision and spatial resolution. We have developed a system that couples a commercial laser tracker with an advanced calibration technique and a system of external references. This system was built to measure the off-axis primary mirror segments for the Giant Magellan Telescope where it will guide loose abrasive grinding and initial polishing. The system is further expected to corroborate the optical interferometric tests of the completed mirrors, in several low-order aberrations. The design, analysis, calibration, and measured performance of this system will be presented.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tom L. Zobrist, James H. Burge, Warren B. Davison, and Hubert M. Martin "Measurements of large optical surfaces with a laser tracker", Proc. SPIE 7018, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation, 70183U (23 July 2008); https://doi.org/10.1117/12.789934
Lens.org Logo
CITATIONS
Cited by 20 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Monochromatic aberrations

Surface finishing

Calibration

Optical testing

Optical tracking

Laser systems engineering

RELATED CONTENT

Research on site measuring uncertainty of the laser tracker
Proceedings of SPIE (September 18 2014)
Production Interferometric Testing Of Diamond-Turned Surfaces
Proceedings of SPIE (December 25 1979)
Novel method for disk run-out testing
Proceedings of SPIE (December 08 1998)

Back to Top