Paper
31 December 2008 Effect of ambient light on surface roughness inspection
Zixin Chen, Zhisheng Zhang, Jinfei Shi, Ruwen Chen, Ren Huang
Author Affiliations +
Proceedings Volume 7130, Fourth International Symposium on Precision Mechanical Measurements; 71301P (2008) https://doi.org/10.1117/12.819599
Event: Fourth International Symposium on Precision Mechanical Measurements, 2008, Anhui, China
Abstract
Machine vision is used to assess surface roughness of work pieces in different circumstance light conditions. Different from the traditional stylus way, the machine vision method is a non-contact and non-destructive surface inspection method, and therefore has the prospect in manufacturing application. The effect of ambient light on gray-level distribution parameters was first analyzed. Then a new method, which counts the pixel numbers whose gray value is larger than sum of the Otsu threshold and a given constant, was proposed to represent different roughness. Finally some experiments were conducted to compare the proposed method with other two methods-the first is the method based on standard deviation and root mean square height of the gray-level distribution proposed by Luk, and the second is on gray-level co-occurrence matrix-to evaluate surfaces with different roughness in different conditions. The parameters, such as the constant of the proposed method, the distance and the angle of the gray-level co-occurrence matrix, were optimized to obtain better inspecting performance. Results show that the variance sum between inspecting values of the proposed method and its corresponding real surface roughness is less than half of the other two ways.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zixin Chen, Zhisheng Zhang, Jinfei Shi, Ruwen Chen, and Ren Huang "Effect of ambient light on surface roughness inspection", Proc. SPIE 7130, Fourth International Symposium on Precision Mechanical Measurements, 71301P (31 December 2008); https://doi.org/10.1117/12.819599
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Surface roughness

Calibration

Machine vision

Light sources and illumination

Manufacturing

Cameras

Back to Top