Paper
12 January 2009 Fabrication of transmission gratings for extreme ultraviolet interference lithography
Jie Ma, Xiaoli Zhu, Weizhong Zhu, Changqing Xie, Tianchun Ye, Peixiong Shi
Author Affiliations +
Proceedings Volume 7133, Fifth International Symposium on Instrumentation Science and Technology; 713336 (2009) https://doi.org/10.1117/12.810640
Event: International Symposium on Instrumentation Science and Technology, 2008, Shenyang, China
Abstract
Transmission gratings with a period of 100 nm for extreme ultraviolet interference lithography are fabricated with 2 groups of 50 nm thick Cr bars on a 100 nm thick Si3N4 film. The fabrication process starts with depositing Si3N4 on both sides of (100) Si wafers by LPCVD, followed by electron beam lithography of ZEP520A resist, evaporation of Cr and resist lift-off. A 120 nm thick stop layer of Au is then evaporated onto the surrounding area to eliminate unwanted transmission. Finally, a pair of Si3N4 windows are opened on the back side by dry etching, and the Si under the grating pattern is removed by KOH anisotropic wet etching. Diffraction measurement shows an acceptable first order efficiency of the gratings at the wavelength of 13.4 nm. Using the fabricated gratings at the interference lithography beam line of Shanghai Synchrotron Radiation Facility, economic and efficient fabrication of gratings with a doubled pitch, namely 50 nm period gratings, can be expected.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jie Ma, Xiaoli Zhu, Weizhong Zhu, Changqing Xie, Tianchun Ye, and Peixiong Shi "Fabrication of transmission gratings for extreme ultraviolet interference lithography", Proc. SPIE 7133, Fifth International Symposium on Instrumentation Science and Technology, 713336 (12 January 2009); https://doi.org/10.1117/12.810640
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top