Paper
11 November 2008 Multiwavelength fiber ring laser based on an SOA and Lyot birefringent filter
Author Affiliations +
Proceedings Volume 7134, Passive Components and Fiber-based Devices V; 71344L (2008) https://doi.org/10.1117/12.804323
Event: Asia-Pacific Optical Communications, 2008, Hangzhou, China
Abstract
This paper presents a detailed study on Wavelength Division Multiplexing - Passive Optical Network (WDM-PON) light source of spectrum sliced multiwavelength fiber ring laser and simple optical Lyot filter. First, the principle of the Lyot birefringent filter for comb generation of the multiwavelength laser is theoretically analyzed. Then we incorporate the Lyot filter and a semiconductor optical amplifier (SOA) as the gain medium into a ring laser cavity. Finally, we experimentally demonstrate an SOA based multiwavelength fiber ring laser using Lyot birefringent filter. Multiwavelength operation up to 25 laser lines with the signal-to-noise ratio over 30dB and 0.8nm wavelength spacing was demonstrated. The power equalize is within 2 dB and the line width 0.108nm is close to the equipment resolution. This multiwavelength laser source has also been proved to have good stability after consistently 90 min time evolution. In general, this multiwavelength laser source has the advantage of simple structure, multiwavelength operation, high SNR and good stability.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Minxue Wang, Jian Wu, and Jintong Lin "Multiwavelength fiber ring laser based on an SOA and Lyot birefringent filter", Proc. SPIE 7134, Passive Components and Fiber-based Devices V, 71344L (11 November 2008); https://doi.org/10.1117/12.804323
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Optical filters

Optical filtering

Laser sources

Polarizers

Signal to noise ratio

Linear filtering

Back to Top