Paper
30 April 2009 Eyesafe ladar testbed with coaxial color imager
Robert T. Pack, Jason Swasey, Rees Fullmer, Scott Budge, Paul Israelsen, Brad Petersen, Dean Cook
Author Affiliations +
Abstract
A new experimental full-waveform LADAR system has been developed that fuses a pixel-aligned color imager within the same optical path. The Eye-safe LADAR Test-bed (ELT) consists of a single beam energy-detection LADAR that raster scans within the same field of view as an aperture-sharing color camera. The LADAR includes a pulsed 1.54 μm Erbium-doped fiber laser; a high-bandwidth receiver; a fine steering mirror for raster scanning; and a ball joint gimbal mirror for steering over a wide field of regard are all used. The system has a 6 inch aperture and the LADAR has pulse rate of up to 100 kHz. The color imager is folded into the optical path via a cold mirror. A novel feature of the ELT is its ability to capture LADAR and color data that are registered temporally and spatially. This allows immediate direct association of LADAR-derived 3D point coordinates with pixel coordinates of the color imagery. The mapping allows accurate pointing of the instrument at targets of interest and immediate insight into the nature and source of the LADAR phenomenology observed. The system is deployed on a custom van designed to enable experimentation with a variety of objects.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert T. Pack, Jason Swasey, Rees Fullmer, Scott Budge, Paul Israelsen, Brad Petersen, and Dean Cook "Eyesafe ladar testbed with coaxial color imager", Proc. SPIE 7323, Laser Radar Technology and Applications XIV, 732303 (30 April 2009); https://doi.org/10.1117/12.818146
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Mirrors

Sensors

Cameras

Imaging systems

Raster graphics

Automatic target recognition

Back to Top