Paper
25 October 2011 Simulation of the focusing optics of a crossed Czerny-Turner spectrograph for prototypes adjustments
Ruben Sánchez, Guillermo Baldwin, Rafael Coello
Author Affiliations +
Abstract
It has been prototyped the basic optics and electronics of a crossed Czerny-Turner spectrograph to work at different wavelengths. The optical system of the spectrograph prototype has been simulated using OSLO software in order to optimize the capture of the light spectrum. The study that is presented in this paper is based on the optimization of the focusing optics orientation that would obtain the smallest y-spot width onto a linear CCD, for different central wavelengths. It has been changed the orientation of the focusing optics trough the simulation, and changes in the spot diagram has been observed and plotted. Finally, we have obtained recommendations using these results, how to adjust the focusing optics in real spectrographs for different central wavelengths. Simulated spectrograph had about 0.25 nm mean resolution with a focusing optics of 100 mm focal length.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruben Sánchez, Guillermo Baldwin, and Rafael Coello "Simulation of the focusing optics of a crossed Czerny-Turner spectrograph for prototypes adjustments", Proc. SPIE 8011, 22nd Congress of the International Commission for Optics: Light for the Development of the World, 80112E (25 October 2011); https://doi.org/10.1117/12.903438
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectrographs

Charge-coupled devices

Diffraction gratings

Prototyping

Monochromatic aberrations

Optical simulations

Ray tracing

Back to Top