Paper
20 May 2011 Use of unipolar barriers to block dark currents in infrared detectors
G. R. Savich, J. R. Pedrazzani, D. E. Sidor, S. Maimon, G. W. Wicks
Author Affiliations +
Abstract
The unipolar barrier is a new approach for control of dark currents in infrared photodetectors. First demonstrated in the nBn detector and then in the unipolar barrier photodiode, unipolar barriers have been shown to block surface leakage current. Unipolar barriers can also be implemented to filter out dark current components such as Shockley-Read-Hall current, direct band-to-band tunneling and trap-assisted tunneling, but are not useful for blocking diffusion currents. Current density-voltage characteristics of molecular-beam-epitaxy-grown InAs based unipolar barrier photodiodes are presented and analyzed, showing effective limiting of noise current mechanisms for different unipolar barrier photodiode architectures. RoA data shows near Auger-limited device performance and RoA values in excess of 1x107 Ω-cm2.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. R. Savich, J. R. Pedrazzani, D. E. Sidor, S. Maimon, and G. W. Wicks "Use of unipolar barriers to block dark currents in infrared detectors", Proc. SPIE 8012, Infrared Technology and Applications XXXVII, 80122T (20 May 2011); https://doi.org/10.1117/12.884075
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photodiodes

Diffusion

Sensors

Indium arsenide

Infrared detectors

Infrared radiation

Infrared photography

Back to Top