Paper
26 May 2011 Detection of micro-probe displacement using a Shack-Hartmann wavefront sensor
H. Dierke, C. Schrader, R. Tutsch
Author Affiliations +
Abstract
To decrease the effort to detect micromechanical features by touch probe measuring systems, multiple touch probes composed in an array are used to measure some of these structures at the same time, owing to the alignment of many similar structures on a wafer. While usually the touch probe signal is read out electronically, in this investigation a Shack-Hartmann sensor is used to observe the reflective back plane of the micro probe array. Shack-Hartmann wave-front sensors use microlens arrays in conjunction with a CCD array. A planar wave-front that is transmitted through a microlens array and imaged on a CCD sensor will form a regular pattern of bright spots. If, however, the wave-front is distorted, the light imaged on the CCD sensor will consist of some regularly spaced spots mixed with displaced spots and missing spots. This information is used to calculate the shape of the wave-front that was incident on the microlens array.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Dierke, C. Schrader, and R. Tutsch "Detection of micro-probe displacement using a Shack-Hartmann wavefront sensor", Proc. SPIE 8082, Optical Measurement Systems for Industrial Inspection VII, 80820K (26 May 2011); https://doi.org/10.1117/12.889581
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Wavefront sensors

Sensors

CCD image sensors

Microlens array

Silicon

Microlens

Semiconducting wafers

Back to Top