Generating high DOF light by using tapered hollow tube in a lithography system

Chun-Yen Chen; Yu-Hsun Lee; Chih-Jen Chien; Yuh-Yan Yu; Chih-Kung Lee

doi:10.1117/12.906722

14 February 2012 Generating high DOF light by using tapered hollow tube in a lithography system

Chun-Yen Chen, Yu-Hsun Lee, Chih-Jen Chien, Yuh-Yan Yu, Chih-Kung Lee

Proceedings Volume 8249, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics V; 824912 (2012) https://doi.org/10.1117/12.906722
Event: SPIE MOEMS-MEMS, 2012, San Francisco, California, United States

Abstract

In this paper, we proposed a tapered hollow tube which can produce a near diffraction-limit spot and focus the incident light in far-field region. From previous researches, the sub-wavelength annular aperture (SAA) made on metallic film generates a Bessel beam in far-field region. Also, the traditional tapered fiber has been widely used in near-field scanning optical microscope (NSOM) to achieve super-resolution in near-field. Combining these two concepts, tapered hollow tube was shown to have great potential in creating a small sub-micron spot size and long depth of focus (DOF) emitted light beam. By using the commercially available capillary and fiber heat-pulling method, it was found that tube processed per design to be disclosed in this paper can achieve Bessel beam as well. It will be shown that the SAA-like structure was actually implemented by the geometry of the tube tip. From FDTD simulation and experiment, the emitted beam was identified to have more than 10 μm DOF and 250-300 nm focal spot excited by using the 408 nm laser source. These results not only can help us pursue lithography applied to create through silicon via (TSV) process in far-field region while maintaining near diffraction-limit spot size. The high throughput and side lobe became a serious problem when continuous incident light was used. To circumvent this problem, the incident light from was changed from continuous to pulse type and a suitable lithography experimental system designed by using three-axis displacement platform was developed. All results will be detailed in this paper.

Citation Download Citation

Chun-Yen Chen, Yu-Hsun Lee, Chih-Jen Chien, Yuh-Yan Yu, and Chih-Kung Lee "Generating high DOF light by using tapered hollow tube in a lithography system", Proc. SPIE 8249, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics V, 824912 (14 February 2012); https://doi.org/10.1117/12.906722

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available