Paper
8 February 2012 830nm high power single mode DFB laser for high volume applications
Pierre Doussiere, Mark Tashima, Hery Djie, Kong Weng Lee, Vince Wong, David Venables, Victor Rossin, Erik Zucker
Author Affiliations +
Proceedings Volume 8277, Novel In-Plane Semiconductor Lasers XI; 82770A (2012) https://doi.org/10.1117/12.910238
Event: SPIE OPTO, 2012, San Francisco, California, United States
Abstract
We report an 830nm high power single spatial mode DFB laser design in the AlGaAs/GaAs system that offers performance close to a Fabry-Perot design as well as manufacturing yield compatible with volume production. Single-mode power in excess of 200mW at case temperature up to 600C is consistently obtained for current below 300mA. This performance level is enabled by use of an efficient, partially-corrugated design and a 2nd order grating located on the p-side. Through careful design and an optimized epitaxial re-growth on the grating, promising reliability results compatible with uncooled application are demonstrated.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pierre Doussiere, Mark Tashima, Hery Djie, Kong Weng Lee, Vince Wong, David Venables, Victor Rossin, and Erik Zucker "830nm high power single mode DFB laser for high volume applications", Proc. SPIE 8277, Novel In-Plane Semiconductor Lasers XI, 82770A (8 February 2012); https://doi.org/10.1117/12.910238
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical design

Semiconductor lasers

High power lasers

Manufacturing

Fabry–Perot interferometers

Reliability

Interfaces

RELATED CONTENT

Heading to 1 kW levels with laser bars of high...
Proceedings of SPIE (March 13 2015)
1030nm DBR tapered diode laser with up to 16 W...
Proceedings of SPIE (February 20 2017)
325 Watts from 1 cm wide 9xx laser bars for...
Proceedings of SPIE (March 17 2005)
High power diode laser bars as pump sources for fiber...
Proceedings of SPIE (April 22 2005)

Back to Top