Paper
14 December 2011 High sensitive uplink design in WiMAX radio-over-fiber PON
Koyu Chinen, Haruka Mikamori
Author Affiliations +
Proceedings Volume 8309, Optical Transmission Systems, Subsystems, and Technologies IX; 830922 (2011) https://doi.org/10.1117/12.905024
Event: SPIE/OSA/IEEE Asia Communications and Photonics, 2011, Shanghai, China
Abstract
A high sensitive and low distortion amplification design was carried out in the uplink of the WiMAX Radioover- Fiber PON that was configured with a 1:8 splitter and a 30km-SMF. The EDFA gain compensates the optical loss of the optical components and SMF. The gain of the LNA of the PIN-PD is not high so that the LNA output power does not exceed -15dBm. The gain of the LNA of the DFB-LD driver is higher than the difference between the input power and 20dBm. We achieved a low Relative constellation error (RCE) of -25dB at the input modulation power of -60dBm. An estimation of the power diagram to achieve -80dBm sensitivity with 60km SMF was carried out.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Koyu Chinen and Haruka Mikamori "High sensitive uplink design in WiMAX radio-over-fiber PON", Proc. SPIE 8309, Optical Transmission Systems, Subsystems, and Technologies IX, 830922 (14 December 2011); https://doi.org/10.1117/12.905024
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical amplifiers

Modulation

Single mode fibers

Radio over Fiber

Receivers

Distortion

Optical components

Back to Top