Paper
29 November 2011 Sensitivity-enhanced refractive index sensor by using tapered thin-core fiber based inline Mach-Zehnder interferometer
Author Affiliations +
Proceedings Volume 8311, Optical Sensors and Biophotonics III; 83110C (2011) https://doi.org/10.1117/12.904486
Event: SPIE/OSA/IEEE Asia Communications and Photonics, 2011, Shanghai, China
Abstract
A sensitivity-enhanced optical fiber refractive index sensor based on inline Mach-Zehnder interferometer is proposed. The sensor head is formed by splicing a tapered thin-core diameter fiber between two sections of single mode fibers. The taper (less than 1 mm) plays an important role in improving the sensitivity of the sensor. The sensitivity of refractive index is measured to be 0.447 nm for a 1% change of refractive index in the typical refractive index range of 1.333- 1.3725. The whole fabrication process (including splicing and tapering) can be operated by a commercial fiber splicing machine. The proposed sensor also shows the merits of simple structure, low cost, and easy fabrication.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jie Shi, Shilin Xiao, and Meihua Bi "Sensitivity-enhanced refractive index sensor by using tapered thin-core fiber based inline Mach-Zehnder interferometer", Proc. SPIE 8311, Optical Sensors and Biophotonics III, 83110C (29 November 2011); https://doi.org/10.1117/12.904486
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Cladding

Refractive index

Single mode fibers

Mach-Zehnder interferometers

Interferometers

Fusion splicing

Back to Top