Paper
17 October 2012 Simultaneous measurement of refractive index and temperature based on a partial cone-shaped FBG
Liang Qi, Chun-Liu Zhao, Shuqin Zhang, Zaixuan Zhang, Shangzhong Jin
Author Affiliations +
Proceedings Volume 8421, OFS2012 22nd International Conference on Optical Fiber Sensors; 84214B (2012) https://doi.org/10.1117/12.970495
Event: OFS2012 22nd International Conference on Optical Fiber Sensor, 2012, Beijing, China
Abstract
A refractive index and temperature simultaneous measurement sensor based on a partial cone-shaped fiber Bragg grating (FBG) was demonstrated. The bandwidth of the partial cone-shaped FBG is only effected by the surround refractive index (SRI), while the wavelength decided by the un-etched FBG is only sensitive to temperature. Utilizing the obvious difference of the bandwidth and the wavelength on temperature and the refractive index, two parameters can be distinguished and measured simultaneously using one partial cone-shaped FBG. Experimental results show that the proposed sensor has a SRI sensitivity of -13.669 nm/RIU in the range of 1.33~1.42 and a temperature sensitivity of 9.8 pm/°C in the range of 20~80°C.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liang Qi, Chun-Liu Zhao, Shuqin Zhang, Zaixuan Zhang, and Shangzhong Jin "Simultaneous measurement of refractive index and temperature based on a partial cone-shaped FBG", Proc. SPIE 8421, OFS2012 22nd International Conference on Optical Fiber Sensors, 84214B (17 October 2012); https://doi.org/10.1117/12.970495
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Refractive index

Sensors

Temperature metrology

Head

Reflectivity

Water

Back to Top