Paper
26 February 2013 Spectroscopic investigation of the glass system TeO2-WO3-Na2ONb2O5 for mid-infrared amplifiers
Author Affiliations +
Abstract
Tellurite glasses following the molar concentration 71.5% TeO2, 22.5% WO3, 5% Na2O and 1.5% Nb2O5 have been investigated. Samples doped with Tm2O3, Pr2O3, Yb2O3 or Bi2O3 were fabricated by the conventional melt quenching process. Rare-earth (RE) 3+ ions have well defined emission bands. On the other hand, Bismuth emission in the infrared region have been found in some glasses and even that emission laser have been already obtained, the mechanism behind its luminescence is still misunderstood[1]. The Bismuth emission is sometimes referred as a “superbroadband” emission around 1.3um, which is very promising for an optical amplifier, but, to the best of our knowledge a bismuth based optical amplifier have not been produced yet. Our purpose is to investigate the mechanism behind this misunderstood “superbroadband” luminescence, and compare it with the rare-earths properties in the same range. The characterization consists in measurements of optical absorption spectra, optical emission spectra and life-time decay. Differential thermal analysis (DTA) was also performed, to identify changes in Tg and Tx as function of the doping concentration, which is important to the drawing process of a fiber.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marcos P. Belançon and Luis Carlos Barbosa "Spectroscopic investigation of the glass system TeO2-WO3-Na2ONb2O5 for mid-infrared amplifiers", Proc. SPIE 8601, Fiber Lasers X: Technology, Systems, and Applications, 86012F (26 February 2013); https://doi.org/10.1117/12.2003021
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Luminescence

Optical amplifiers

Bismuth

Ytterbium

Absorption

Fiber amplifiers

Back to Top