Paper
19 April 2013 Brush wear and dust accumulation fiber-optic sensor system for synchronous compensators online monitoring
Claudio Floridia, Livia R. Alves, Fábio R. Bassan, Antonio A. Juriollo, Flávio Borin, Afonso Rafael Cunha Souza
Author Affiliations +
Abstract
An electro-optical sensor system for monitoring synchronous compensators in the electrical distribution network is presented. The fiber-optic sensor system is based on two main technologies: optical bend loss sensors for monitoring the brush wear and, free-space optics to determine the dust accumulation from brush wear. Both techniques are characterized to monitor the parameters by means of simple optical power readings. In order to avoid optical power fluctuations in the fiber optics link from interrogation system to the synchronous compensators, bend-loss insensitive fibers are used. The low-cost interrogation system consists on one laser, optical splitters and 80 photodetectors to independently monitor each one of the synchronous compensators’s brushes. This setup ensures an ease installation and avoid cascaded fault that a serial configuration could originates, thus increasing reliability of the sensor system.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claudio Floridia, Livia R. Alves, Fábio R. Bassan, Antonio A. Juriollo, Flávio Borin, and Afonso Rafael Cunha Souza "Brush wear and dust accumulation fiber-optic sensor system for synchronous compensators online monitoring", Proc. SPIE 8692, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2013, 86924A (19 April 2013); https://doi.org/10.1117/12.2009021
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics sensors

Transducers

Fiber optics

Free space optics

Laser optics

Optical fibers

RELATED CONTENT

Evaluation Of An OTDR Microbend Distributed Sensor
Proceedings of SPIE (January 16 1989)
Optical fiber detector based on light diffraction
Proceedings of SPIE (October 21 2004)
Refelection Type Fiber-Optic Sensor
Proceedings of SPIE (April 28 1987)
High-Temperature Fiber Optic Pressure Sensor
Proceedings of SPIE (February 13 1990)
Wavelength-multiplexed multimode fiber optic sensor system
Proceedings of SPIE (November 27 1996)

Back to Top