Performance evaluation of a combined neutron and x-ray digital imaging system

V. Sinha; A. Srivastava; H. K. Lee; X. Liu

doi:10.1117/12.2009931

11 April 2013 Performance evaluation of a combined neutron and x-ray digital imaging system

V. Sinha, A. Srivastava, H. K. Lee, X. Liu

Proceedings Volume 8694, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2013; 86940R (2013) https://doi.org/10.1117/12.2009931
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013, San Diego, California, United States

Abstract

A neutron and X-ray combined computed tomography system (NXCT) has been developed1 at the Missouri University of Science & Technology. It is believed that it will provide a superior method for non-destructive testing and evaluation. The system is housed within the Missouri University of Science & Technology Reactor (MSTR) and is the first such imaging platform and synthesis method to be developed. The system utilizes neutrons obtained directly from the reactor core and X-rays an X-ray generator. Characterization of the newly developed digital imaging system is imperative to the performance evaluation, as well as for describing the associated parameters. The preliminary evaluation of the NXCT system was performed in terms of image uniformity, linearity and spatial resolution. Additionally, the correlation between the applied beam intensity, the resulting image quality, and the system sensitivity was investigated. The combined neutron/X-ray digital imaging system was evaluated in terms of performance parameters and results are detailed. The MTF of the X-ray imaging module was calculated using the Edge method. The spatial frequency at 10% of the MTF was found to be 8 lp/mm, which is in agreement with the value of 8.5 lp/mm determined from the square wave response method. The highest detective quantum efficiency of the X-ray imaging module was found to be 0.13. Furthermore, the NPS spectrum for the neutron imaging module was also evaluated in a similar way as the X-ray imaging module. In order to improve the image quality of the neutron imaging module, a pin-hole mask phantom was used to correct the geometrical non-linearity of the delay line anode readout. The non-linearity correction of the delay line anode readout has been shown through the corrected images of perforated cadmium strip and electroformed phantom.

Citation Download Citation

V. Sinha, A. Srivastava, H. K. Lee, and X. Liu "Performance evaluation of a combined neutron and x-ray digital imaging system", Proc. SPIE 8694, Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2013, 86940R (11 April 2013); https://doi.org/10.1117/12.2009931

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available