Paper
20 March 2013 Finite element analysis of flextensional transducer with slotted shell
Si Chen, Yu Lan
Author Affiliations +
Proceedings Volume 8768, International Conference on Graphic and Image Processing (ICGIP 2012); 87685P (2013) https://doi.org/10.1117/12.2012141
Event: 2012 International Conference on Graphic and Image Processing, 2012, Singapore, Singapore
Abstract
The study of low frequency, small size transducer was an important aspect for the development of the underwater acoustic transducer. The Class IV flextensional transducer was a typical low frequency, high-power and small size transducer. For decreasing its resonant frequency in the case of small size, a flextensional transducer with slotted shell was analyzed using finite element software ANSYS. A comparison between the flextensioanl transducer with slotted shell and the Class IV flextensional transducer was made. The maximum size of the shell is 200mm. The transmitting voltage response of the transducer reaches to 131dB with resonant frequency 600Hz in water. The transducer could radiate at low frequency with small size of the shell.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Si Chen and Yu Lan "Finite element analysis of flextensional transducer with slotted shell", Proc. SPIE 8768, International Conference on Graphic and Image Processing (ICGIP 2012), 87685P (20 March 2013); https://doi.org/10.1117/12.2012141
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Finite element methods

Acoustics

Actuators

Ceramics

Image processing

Local area networks

Back to Top