Paper
5 September 2014 Design and analysis of large-mode-area microstructured polymer optical fibre with single-mode operation
Author Affiliations +
Abstract
A single mode microstructured polymer optical fiber has been designed and analysed based on finite element method (FEM). The design parameters of proposed microstructured polymer optical fiber structure have been optimized to obtain single mode operation along with mode area of 895 μm2. The differential loss between fundamental and higher order modes of structure have been obtained very large (~103) with negligible loss of fundamental mode. The proposed structure is effectively single mode at 632.8 nm wavelength after the short distance 1.65 m with very low loss of guiding mode. The proposed structure is applicable for high power delivery devices.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. S. Saini, V. Dahiya, A. Kumar, and R. K. Sinha "Design and analysis of large-mode-area microstructured polymer optical fibre with single-mode operation", Proc. SPIE 9200, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications VIII, 92000H (5 September 2014); https://doi.org/10.1117/12.2061825
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymer optical fibers

Polymers

Finite element methods

Optical fibers

Cladding

Polymethylmethacrylate

Structured optical fibers

Back to Top