Paper
2 September 2014 Simulation of segmented mirror telescope and calculating asphericity of segmented mirror
Zhou Liao, Qi Qiu, Yudong Zhang
Author Affiliations +
Proceedings Volume 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 92800E (2014) https://doi.org/10.1117/12.2067986
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
To determine parameters of the Segmented Mirror Telescope is quite essential for the design, manufacture, testing and construct of the telescope system, especially the F-number parameters and curvature radius of the primary mirror, as well as the asphericity. A model of Sub-segmented mirror was established in this paper, based on which, using the feature points combined with lagrange condition extreme, the asphericity calculation of the asymmetrical hexagon off-axis parabolic mirror in different central points is solved. The 8m and 11m segmented mirror telescope were taken for example in the calculation, and got the relation curve between F-number of primary mirror and Asphericity of segmented mirror, respectively. This work is useful for the design, manufacturing and testing of the large diameter Segmented Mirror Telescope.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhou Liao, Qi Qiu, and Yudong Zhang "Simulation of segmented mirror telescope and calculating asphericity of segmented mirror", Proc. SPIE 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 92800E (2 September 2014); https://doi.org/10.1117/12.2067986
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Segmented mirrors

Off axis mirrors

Optics manufacturing

Design for manufacturability

Manufacturing

RELATED CONTENT

A prototype for the primary mirror of the ESA ARIEL...
Proceedings of SPIE (July 10 2018)
Manufacturing of a three mirror anastigmat telescope
Proceedings of SPIE (November 19 2003)
Advanced manufacturing technologies for the BeCOAT telescope
Proceedings of SPIE (February 01 1994)
Telescope costs and cost reduction
Proceedings of SPIE (March 21 1997)
Light and lightened mirrors for astronomy
Proceedings of SPIE (July 14 2008)

Back to Top