Paper
6 August 2014 Preparation and optimization of the laser thin film filter
Jun-hong Su, Wei Wang, Jun-qi Xu, Yao-jin Cheng, Tao Wang
Author Affiliations +
Proceedings Volume 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 928113 (2014) https://doi.org/10.1117/12.2069371
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
A co-colored thin film device for laser-induced damage threshold test system is presented in this paper, to make the laser-induced damage threshold tester operating at 532nm and 1064nm band. Through TFC simulation software, a film system of high-reflection, high -transmittance, resistance to laser damage membrane is designed and optimized. Using thermal evaporation technique to plate film, the optical properties of the coating and performance of the laser-induced damage are tested, and the reflectance and transmittance and damage threshold are measured. The results show that, the measured parameters, the reflectance R ≥ 98%@532nm, the transmittance T ≥ 98%@1064nm, the laser-induced damage threshold LIDT ≥ 4.5J/cm2 , meet the design requirements, which lays the foundation of achieving laser-induced damage threshold multifunction tester.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jun-hong Su, Wei Wang, Jun-qi Xu, Yao-jin Cheng, and Tao Wang "Preparation and optimization of the laser thin film filter", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 928113 (6 August 2014); https://doi.org/10.1117/12.2069371
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser damage threshold

Laser induced damage

Refractive index

Transmittance

Thin films

Titanium dioxide

Coating

RELATED CONTENT

Design and preparation of laser film on sapphire substrate
Proceedings of SPIE (August 06 2014)
Thin-film polarizers for the OMEGA EP laser system
Proceedings of SPIE (February 07 2006)
Research on SiO2 film laser damage threshold
Proceedings of SPIE (October 16 2012)

Back to Top