Efficiency optimization and analysis of 808nm VCSELs with a full electro-thermal-optical numerical model

Andreas P. Engelhardt; Johanna S. Kolb; Friedhard Roemer; Ulrich Weichmann; Holger Moench; Bernd Witzigmann

doi:10.1117/12.2077065

4 March 2015 Efficiency optimization and analysis of 808nm VCSELs with a full electro-thermal-optical numerical model

Andreas P. Engelhardt, Johanna S. Kolb, Friedhard Roemer, Ulrich Weichmann, Holger Moench, Bernd Witzigmann

Proceedings Volume 9381, Vertical-Cavity Surface-Emitting Lasers XIX; 93810M (2015) https://doi.org/10.1117/12.2077065
Event: SPIE OPTO, 2015, San Francisco, California, United States

Abstract

A high electro-optical conversion efficiency of a VCSEL (Vertical-Cavity Surface-Emitting Lasers) is one of the key requirements for their application in high power systems for heating, illumination and pumping applications. The substantial amount of degrees of freedom in the epitaxial and structural design of a VCSEL demands numerical guidance in form of technology computer aided design (TCAD) modeling for a straight forward and successful optimization of the devices. We set up a full electro-thermal optical model for the simulation of VCSEL devices. The electro-thermal part of the simulation follows a drift-diffusion model complemented by a customized, energy resolved, semi-classical carrier capture theory in the QW regions. Optical modes, eigensolutions of the vectorial electromagnetic wave equation, stem from a finite element vectorial solver. The electro-thermal and optical models are linked via the photon-rate equation using QW gain spectra (screened Hartree-Fock approximation) and iterated to self-consistency in a Gummel-type iteration scheme. For comparison and calibration, experimental reference data was extracted from oxide-confined, top-emitting VCSEL devices with an emission wavelength of 808 nm. Our simulations are in good agreement with the electro-optical characteristics of the experimental reference. With the calibrated, microscopic model, routes of design adjustment for efficiency optimization are explored. Exemplarily, the maximum VCSEL efficiency of the simulated reference design increases by 10% (absolute) when free hole absorption is switched off. Accordingly, with the combination of an electro-thermal and optical description, a balancing of the tradeoffs of pDBR doping towards reduced free carrier absorption results in a noteworthy efficiency improvement which is validated with experimental data.

Citation Download Citation

Andreas P. Engelhardt, Johanna S. Kolb, Friedhard Roemer, Ulrich Weichmann, Holger Moench, and Bernd Witzigmann "Efficiency optimization and analysis of 808nm VCSELs with a full electro-thermal-optical numerical model", Proc. SPIE 9381, Vertical-Cavity Surface-Emitting Lasers XIX, 93810M (4 March 2015); https://doi.org/10.1117/12.2077065

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available