Paper
24 September 2015 Results of a polishing study for SCHOTT XLD glasses
Ralf Jedamzik, Harshwadhan Yadwad, Volker Dietrich
Author Affiliations +
Abstract
Extremely low dispersion glasses (e.g. SCHOTT XLD glasses) play an essential role in the color correction of optical systems. Together with short flint glasses (KZFS Types) they can be used for apochromatic color correction in the visible spectrum or even for broadband color correction in combination with lanthanum crown glasses (LAK Types).

Unfortunately the chemical composition of those glasses leads to a high coefficient of thermal expansion, low hardness and low resistance against chemical attacks. As a consequence these glasses tend to be difficult in processing. Therefore the glass engineer’s task is to improve processing characteristics while keeping their special optical properties. N-FK58 XLD is an example of a new generation of XLD glasses from SCHOTT with improved workability. In 2014 a processing study has been conducted to optimize the polishing of XLD glasses. This presentation will show the results of this study for N-FK58 XLD and the application to other fluorophosphates glasses.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ralf Jedamzik, Harshwadhan Yadwad, and Volker Dietrich "Results of a polishing study for SCHOTT XLD glasses", Proc. SPIE 9628, Optical Systems Design 2015: Optical Fabrication, Testing, and Metrology V, 96280T (24 September 2015); https://doi.org/10.1117/12.2191036
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polishing

Glasses

Surface finishing

Surface roughness

Oxides

Abrasives

Polyurethane

Back to Top