Performance test of the synergetic use of simulated lidar and microwave radiometer observations for mixing-layer height detection

Umar Saeed; Francesc Rocadenbosch; Susanne Crewell

doi:10.1117/12.2195091

16 October 2015 Performance test of the synergetic use of simulated lidar and microwave radiometer observations for mixing-layer height detection

Umar Saeed, Francesc Rocadenbosch, Susanne Crewell

Author Affiliations +

Proceedings Volume 9640, Remote Sensing of Clouds and the Atmosphere XX; 964008 (2015) https://doi.org/10.1117/12.2195091
Event: SPIE Remote Sensing, 2015, Toulouse, France

Abstract

There are several instruments and methods to retrieve the atmospheric Mixing Layer Height (MLH). However, none of these instruments or methods can measure the development of the MLH under all atmospheric conditions. For example, aerosol signatures measured by backscatter lidars can be used to determine the MLH but this approach is reasonable only when the atmosphere is well-mixed. Microwave Radiometer (MWR) derived profiles have low vertical resolution and cannot resolve fine structures in the boundary layer, especially, at higher altitudes. Here we propose a method which combines data from a ground-based lidar and a MWR, in simulated as well as real measurements scenarios, to overcome these limitations. The method works by fitting an erf-like transition model function to the section of range-corrected lidar backscatter signal. The section of the lidar backscatter signal for fitting the model function is obtained by incorporating the MWR estimates of MLH along with their uncertainties. The fitting is achieved by using an extended Kalman filter (EKF). The proposed approach, by exploiting the synergy between the two instruments, enables to detect MLH with original vertical and temporal resolutions. Test cases combining simulated data for a co-located lidar-ceilometer and a MWR are presented. The simulated data is obtained from the Dutch Atmospheric Large Eddy Simulation (DALES) model for boundary layer studies. Doppler wind lidar along with radiosondes (whenever available) data is used to assess the quality of the synergetic MLH estimates. Data from the HD(CP)² Observational Prototype Experiment (HOPE) campaign at Jülich, Germany is used to test the proposed method.

Citation Download Citation

Umar Saeed, Francesc Rocadenbosch, and Susanne Crewell "Performance test of the synergetic use of simulated lidar and microwave radiometer observations for mixing-layer height detection", Proc. SPIE 9640, Remote Sensing of Clouds and the Atmosphere XX, 964008 (16 October 2015); https://doi.org/10.1117/12.2195091

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available