Paper
20 April 2016 Hidden disbond detection in spent nuclear fuel storage systems using air-coupled ultrasonics
Author Affiliations +
Abstract
This paper studies an air-coupled ultrasonic scanning approach for damage assessment in steel-clad concrete structures. An air-coupled ultrasonic sender generates guided plate waves in the steel cladding and a small contact-type receiver measures the corresponding wave responses. A frequency-wavenumber (f-k) domain signal filtering technique is used to isolate the behavior of the fundamental symmetric (S0) mode of the guided plate waves. The behavior of the S0 mode is sensitive to interface bonding conditions. The proposed inspection approach is verified by a series of experiments performed on laboratory-scale specimens. The experimental results demonstrate that hidden disbond between steel cladding and underlying concrete substrate can be successfully detected with the ultrasonic test setup and the f-k domain signal filtering technique.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Homin Song and John S. Popovics "Hidden disbond detection in spent nuclear fuel storage systems using air-coupled ultrasonics", Proc. SPIE 9803, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2016, 980331 (20 April 2016); https://doi.org/10.1117/12.2219482
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ultrasonics

Signal attenuation

Waveguides

Cladding

Receivers

Interfaces

Inspection

Back to Top