Paper
17 May 2016 NEFDS contamination model parameter estimation of powder contaminated surfaces
Timothy J. Gibbs, David W. Messinger
Author Affiliations +
Abstract
Hyperspectral signatures of powdered contaminated surfaces are challenging to characterize due to intimate mixing between materials. Most radiometric models have difficulties in recreating these signatures due to non-linear interactions between particles with different physical properties. The Nonconventional Exploitation Factors Data System (NEFDS) Contamination Model is capable of recreating longwave hyperspectral signatures at any contamination mixture amount, but only for a limited selection of materials currently in the database. A method has been developed to invert the NEFDS model and perform parameter estimation on emissivity measurements from a variety of powdered materials on substrates. This model was chosen for its potential to accurately determine contamination coverage density as a parameter in the inverted model. Emissivity data were measured using a Designs and Prototypes fourier transform infrared spectrometer model 102 for different levels of contamination. Temperature emissivity separation was performed to convert data from measure radiance to estimated surface emissivity. Emissivity curves were then input into the inverted model and parameters were estimated for each spectral curve. A comparison of measured data with extrapolated model emissivity curves using estimated parameter values assessed performance of the inverted NEFDS contamination model. This paper will present the initial results of the experimental campaign and the estimated surface coverage parameters.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Timothy J. Gibbs and David W. Messinger "NEFDS contamination model parameter estimation of powder contaminated surfaces", Proc. SPIE 9840, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XXII, 98400L (17 May 2016); https://doi.org/10.1117/12.2222302
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Contamination

Data modeling

Particles

Quartz

Aluminum

Temperature metrology

Atmospheric particles

Back to Top