Presentation + Paper
18 April 2016 CMOS-compatible metamaterial-based wideband mid-infrared absorber for microspectrometer applications
Author Affiliations +
Abstract
The design of a metamaterial-based absorber for use in a MEMS-based mid-IR microspectrometer is reported. The microspectrometer consists of a LVOF that is aligned with an array of thermopile detectors, which is fabricated on a SiN membrane and coated with the absorber. Special emphasis is put on the CMOS compatible fabrication, which results in an absorber design based on Al disc resonators and an Al background plane that are separated by an SiO2 layer. Wideband operation over the 3-4 μm spectral range is achieved by staggered tuning of four Al disk resonators in one 1.5 x 1.5 μm2 unit cell, using four different values of the radius of the Al disk between 0.50 μm and 0.63 μm and an SiO2 layer thickness of 150 nm. Simulations reveal an average absorption of about 95% with a ±4% ripple at normal incidence, which reduces to about 80% absorption at a 20° incidence angle. The influence of material choice and dimensions on a single absorption peak was studied and the magnetic polariton was identified as the underlying mechanism of absorption.
Conference Presentation
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ehsan Karimi Shahmarvandi, Mohammadamir Ghaderi, N. Pelin Ayerden, Ger de Graaf, and Reinoud F. Wolffenbuttel "CMOS-compatible metamaterial-based wideband mid-infrared absorber for microspectrometer applications", Proc. SPIE 9883, Metamaterials X, 988309 (18 April 2016); https://doi.org/10.1117/12.2227800
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Aluminum

Dielectrics

Electron beam lithography

Mid-IR

Metamaterials

Gold

Back to Top