1 August 1995 Light sectioning with improved depth resolution
Jacques Lewandowski, Lyne Desjardins
Author Affiliations +
Abstract
Light sectioning of an object surface uses the line deformation imaged by a CCD camera to compute the object profile. Because of the low optical magnification between the object and the CCD image plane, the measured CCD line deformation is small and leads to low resolution in profile measurements. To obtain larger CCD line deformation without decreasing the field of view, we propose to use an additional cylindrical lens to magnify only the horizontal deformation (which contains the profile information) without modifying the vertical field of view. The limitations of this anamorphic system, such as maximum object depth and magnification, are theoretically determined. The improvements given by the cylindrical lens are calculated, and experimental profiles (pyramid, cylinder) show a gain in depth resolution of approximately 2 to 3 over an earlier light sectioning system. The depth resolution, which was 0.36 mm with the previous system, is now improved to 0.15 mm for an average object distance of 350 mm.
Jacques Lewandowski and Lyne Desjardins "Light sectioning with improved depth resolution," Optical Engineering 34(8), (1 August 1995). https://doi.org/10.1117/12.207140
Published: 1 August 1995
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

CCD cameras

CCD image sensors

Image resolution

Back to Top