1 April 2009 Novel dark-bright optical solitons conversion system and power amplification
K. Sarapat, N. Sangwara, K. Srinuanjan, Preecha P. Yupapin, N. Pornsuwancharoen
Author Affiliations +
Abstract
We propose a new system of the dark-bright solitons conversion using a micro- and nanoring resonators incorporating an optical add/drop filter, where the add/drop filter can be used to convert the dark soliton to a bright soliton. The key advantage of the system is that the detection of the dark soliton pulse is normally difficult due to the low level of input power. First, a dark soliton pulse is input into a microring resonator and then propagated into smaller micro- and nanoring resonators, respectively. Second, the add/drop filter is applied (connected) into the ring system, where the bright and dark solitons are obtained via the drop and through (or throughput) ports of the add/drop filter, respectively. The results obtained have shown that the detected soliton power can be controlled by the input soliton power and the ring resonator coupling coefficient, which is enough power to use in the transmission link. Thus, significant conversion-amplified signals can be achieved.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
K. Sarapat, N. Sangwara, K. Srinuanjan, Preecha P. Yupapin, and N. Pornsuwancharoen "Novel dark-bright optical solitons conversion system and power amplification," Optical Engineering 48(4), 045004 (1 April 2009). https://doi.org/10.1117/1.3121563
Published: 1 April 2009
Lens.org Logo
CITATIONS
Cited by 73 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solitons

Resonators

Optical solitons

Electronic filtering

Microrings

Optical filters

Optical engineering

RELATED CONTENT


Back to Top