Paper
1 September 1987 Photoablation Of Resist Coated Alignment Targets To Improve VLSI Pattern Overlay
David J. Elliott, Kenneth J. Polasko, Bernhard P. Piwczyk, Ernest W. Balch
Author Affiliations +
Abstract
The reduction in VLSI feature dimensions has progressed at a rapid rate. Dynamic memory circuit complexity has doubled every year and a half over the past twenty years. A large percentage of these circuits' complexity improvement can be directly attributed to improved optical exposure tools and photoresist processing.. Optical exposure tools have extended microlithography well into the submicrometer regime by reducing the exposing wavelength and increasing the numerical aperture. Another key factor in extending resolution capabilities and proess latitude is the introduction of higher gamma, resist processes. For example, contrast enhancing materials (CEM) can effectively increase the resist gamma by a factor of two to three.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David J. Elliott, Kenneth J. Polasko, Bernhard P. Piwczyk, and Ernest W. Balch "Photoablation Of Resist Coated Alignment Targets To Improve VLSI Pattern Overlay", Proc. SPIE 0774, Lasers in Microlithography, (1 September 1987); https://doi.org/10.1117/12.940403
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 5 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical alignment

Semiconducting wafers

Photoresist processing

Laser ablation

Overlay metrology

Optical lithography

Very large scale integration

RELATED CONTENT

Practical I-Line Lithography
Proceedings of SPIE (August 20 1986)
New 5X i-Line Projection Aligner For VLSI Fabrication
Proceedings of SPIE (January 01 1988)
Present status and technical issues of x-ray lithography
Proceedings of SPIE (September 01 1998)
Overlay Tolerances For Vlsi Using Wafer Steppers
Proceedings of SPIE (January 01 1988)

Back to Top