Paper
31 March 1989 Application Of Holographic Interferometry Supported By FEM-Calculations During The Development Of A New Assembly Technique
H Borner, M Schulz, J. Villain, H Steinbichler
Author Affiliations +
Proceedings Volume 1026, Holography Techniques and Applications; (1989) https://doi.org/10.1117/12.950242
Event: 1988 International Congress on Optical Science and Engineering, 1988, Hamburg, Germany
Abstract
In modern assembly techniques in order to contact a large multilayer circuit board,complex connectors are necessary. To guarantee a sufficiently high, uniformly distributed contact pressure the knowledge of the deformation of the components under working conditions is indispensible. In the first part of the investigation the deformations were measured with the aid of holographic interferometry. The load on the components was increased in steps and therefore through summation a large total of the stresses in the components via the finite element method (FEM) can be combined with the results of the component surface and the values ob tained experimentally agree well with each other. With the help of this experimentally confirmed model the stresses and deformations can also be calculated for places inside the component that can not be measured at all or only with very costly, time-consuming methods.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H Borner, M Schulz, J. Villain, and H Steinbichler "Application Of Holographic Interferometry Supported By FEM-Calculations During The Development Of A New Assembly Technique", Proc. SPIE 1026, Holography Techniques and Applications, (31 March 1989); https://doi.org/10.1117/12.950242
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Connectors

Finite element methods

Holographic interferometry

Holography

Holograms

Optical simulations

Solids

Back to Top