Paper
9 May 2018 Refractive index and dispersion measurement using low-coherence interferometry with broadband confocal scanning
Author Affiliations +
Abstract
Measurement of the refractive index and thickness of transparent plates is demonstrated using combined low-coherence interferometry and confocal scanning. The low-coherence measurement provides a quantity related to the group index and the confocal scan provides a parameter related to the phase index. Calculation of both the phase and group indices also requires a measurement of the confocal parameter at multiple wavelengths. This is achieved using a broadband source and a line-scan spectrometer to interrogate different regions of the spectrum. Measurements are made on a range of transparent optical materials with the mean percentage errors of each measurand being 0.08%, 0.06%, and 0.12% for np, ng, and thickness t respectively.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Daniel Francis, Helen D. Ford, and Ralph P. Tatam "Refractive index and dispersion measurement using low-coherence interferometry with broadband confocal scanning", Proc. SPIE 10680, Optical Sensing and Detection V, 106801I (9 May 2018); https://doi.org/10.1117/12.2306391
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Confocal microscopy

Refractive index

Spectroscopy

Interferometry

Mirrors

Interferometers

Diodes

Back to Top