Paper
5 November 2018 Stretchable phase-mode Fresnel zone plates for focus tuning
Tianchi Yang, Quanquan Mu, Yanhua Liu, Cheng Chen, Shiqing Zhao, Linsen Chen, Wenbin Huang
Author Affiliations +
Abstract
This paper presents a phase-correcting Fresnel Zone Plates array produced by maskless grayscale lithography, electroforming and transfer film. The Fresnel Zone Plates is fabricated on a polydimethylsiloxane (PDMS) layer, which allows for the adjustment of optical focus. The Fresnel Zone Plates array material has the transparency and stretch ability of the PDMS. By stretching the elastomeric composite in radial direction, the lens focal length is tuned. Good focusing response is demonstrated and a large focus change (≥50%) was achieved by stretching lenses up to 25%. The stretchable Phase-mode Fresnel Zone Plate could be integrated with electronics and have a wide range of potential applications, from medical imaging to surveillance.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tianchi Yang, Quanquan Mu, Yanhua Liu, Cheng Chen, Shiqing Zhao, Linsen Chen, and Wenbin Huang "Stretchable phase-mode Fresnel zone plates for focus tuning", Proc. SPIE 10815, Optical Design and Testing VIII, 108151R (5 November 2018); https://doi.org/10.1117/12.2507966
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zone plates

Nickel

Optics manufacturing

Actuators

Glasses

Lens design

Liquids

Back to Top